AVX-10K Operation
Rev. 002
2022-08-25
22135254
VIAVI
Page
72
of
139
Setting
Definition
Barometric Altitude
Reference
Set to ‘YES’ and enter test altitude for comparison to transponder
reported barometric altitude
Test Type
Allows selection between AC20-165 FAA Advisory Circular for testing
ADS-B installed systems and CS-ACNS applicable EASA requirements
Test Type > Aircraft
Separation
If CS-ACNS test type is selected, select either 3 NM or 5 NM
separation value.
Advanced – ADS-B
Auto DF Setting
Choose DF17 (typical – for Mode S transponders) or DF18 (1090MHz
emitters). Most often this should be left as DF17. The DF18 option
is used for beacons placed on obstacles around airports or in
vehicles that are travelling around aircraft.
Advanced – Position
Decode
Choose Global (most common, decodes two consecutive squitters to
determine position) or Local (uses one squitter and entered GPS
LAT/LON position to determine position)
4.2.2.
Run ADS-B Auto Test
The ADS-B Auto test is a combination of Airborne and Surface testing. Once the test setup parameters
have been entered, and with the Aircraft under test in the airborne state, move to the Airborne
screen, and select the RUN key.
Содержание AVX-10K
