Viavi 138156, Руководство по эксплуатации

Страница: 293 / 404

Operation, Remote Operation
DME Commands
1-2-5 ATC-5000NG ATC/DME Test Set Operation Manual Rev. L0
Page 130 Subject to Export Control. See Cover Page for details. February 2020
5.10.10
VERSIONS REQUEST
5.11
DME COMMANDS
5.11.1
ACCELERATION
5.11.2
CABLE LOSS
5.11.3
CHANNEL
Command Syntax:
{:ATC |:ATC5000NG}{:VERSIONS?}CR
Description:
This command returns the firmware versions.
Return Value:
ASCII Value in the following format:
<User Interface Version>,<Server Version>,<Receiver DSP Version>,<Receiver FPGA
Version>,<Transmitter DSP Version>,<Transmitter FPGA Version>,<Receiver Module #1 FPGA
Version>,<Receiver Module #2 FPGA Version>,<Transmitter Module #1 FPGA
Version>,<Transmitter Module #2 FPGA Version>,<Transmitter Module #3 FPGA
Version>,<Antenna Simulator/Switch Assembly FPGA Version>
Example:
:ATC:VERSIONS?\r
Return:
17.10.2501,17.10.2501,A.R,A.Q,A.R,A.V,A.0,A.0,A.B,A.B,A.B,A.0
Command Syntax:
{:ATC |:ATC5000NG}{:DME}{:ACC | ACCELERATION} SP<numeric>CR
Description:
This command sets the acceleration parameter for range simulation.
Numeric
0 to 399 ft/s/s (decimal ASCII)
Default Value:
0 ft/s/s
Example:
:ATC:DME:ACC 125\r
Query:
:ATC:DME:ACC?\r
Return:
125
Command Syntax:
{:ATC |:ATC5000NG}{:DME:CABLELOSS} SP<numeric>CR
Description:
This command sets the cable loss for the top antenna.
Numeric
0 to 2 dB (decimal ASCII)
Default Value:
0 dB
Example:
:ATC:DME:CABLELOSS 0.2\r
Query:
:ATC:DME:CABLELOSS?\r
Return:
0.2
Command Syntax:
{:ATC |:AYC5000NG}{:DME:CHANNEL} SP<numeric>CR
Description:
This command sets the frequency for the select channel mode.
Numeric
1 to 126 for DME X and DME Y (decimal ASCII)
108.0 to 135.9 for 0 VOR Pair and 5 VOR Pair (decimal ASCII)
952 to 1223 for MHZ X and MHZ Y
Default Value:
978
Example:
:ATC:DME:CHANNEL 12\r
Query:
:ATC:DME:CHANNEL?\r
Return:
12