VIAVI Solutions 3Z RF VISION, Быстрый старт

Страница: 3 / 5

Q U I C K S TA R T G U I D E
Panel
Antenna
Microwave
Antenna
Position strap clamp at the highest
point of the antenna and on the edge
as shown above.
Removing RF V
ision
Place the RF Vision on the mounting
plate then use mounting knob for
secure attachment. READY...
Screw in all four microwave dish
bumpers to the back of the strap
clamp.
Place bracket above the dish, wrap
and secure webbing to ratchet
buckles as shown above .
Secure carrying padded duffle bag
to harness and safely move on to the
next antenna.
Insert ladder strap into the ratchet
buckle just enough to engage.
Pull excess webbing strap so
that it is snug on the antenna.
Ratchet the ladder strap through the
buckle until webbing is tight on the
antenna.
Pull excess webbing strap so that it
is snug on the dish and use rachet
buckle to tighten.
Relocate mounting plate as shown
above then secure it with existing
screws.
Check your work. Ensure saved report
meets requirements.
While firmly holding RF Vision,
unscrew it from the mounting plate
as shown above.
Only after RF Vision has been
removed, lift the rachet buckle open
and pull out ladder strap.
Shutdown RF Vision and together
with the strap clamp place in carrying
padded duffle bag .
Place the RF Vision on the mounting
plate then use mounting knob for
secure attachment. READY...