MANUAL VIAVAC-CB4 / 4.1 ( Operator section ) Art. nr. 50504 EN (01-07-2017)
__________________________________________________________________________________________
22
___________________________________________________________________________________
VIAVAC vacuum lifting BV T. + 31 348 449 660 E. [email protected] I. www.viavac.com
(2)
CB falling safety device for horizontal wall and roof panels
HORIZONTAL WALL PANELS
ROOF PANELS
ROOF PANELS
( 2 ) Terugloopblokkering
The falling safety devices are executed by means of lifting straps with hooks, which must be hooked to the
device. During use the following must take place.
1
The correct falling safety device is hooked to the therefore intended fixing points on the device ( 1 ).
2
Lift the element with the vacuum lifter approx. 0,5 meter free from the ground.
3 Consequently the straps are at both ends put around the element as indicated above.
4 Through the clamp buckle ( 2 ) the strap is pulled tight around the element. (no clearance).
5 With the lifting device the whole unit is lifted to the designated place.
6 Just before the element is put in its place, the falling safety device is removed after which the element is
placed on its spot.
1.
Protect from sharp edges of the elements to be lifted at location of the straps.
2.
If there are cracks or tears in the lifting straps, do not use them and replace them
immediately.
ITEM QUAN. DESCRIPTION
WEIGHT
kg
ART. NR
1
1 set
Falling safety device FS4
8
408007
