Get ready to take charge of your health!
Setting up your device is easy.Follow these quick steps to get you started with your monitor.
WE
Wellue powered by Viatom
®
Wearable Pulse Oximeter (WearO2)
Quick Start Guide
Страница 1: ...ready to take charge of your health Setting up your device is easy Follow these quick steps to get you started with your monitor WE Wellue powered by Viatom Wearable Pulse Oximeter WearO2 Quick Start Guide ...
Страница 2: ...uring recording and avoid any strong ambient light condition 1 Wear the device on thumb finger index finger as option in case of too tight for thumb Try to move the sensor along the forefinger to find out a best fit Avoid being loose Loose wearing causes inaccurate measure 2 Turn on the device After a few seconds the device will begin to monitor ...
Страница 3: ... if you wear the device again the record will be resumed After the countdown the data will be ready for sync Sync data 1 After the countdown run App to sync data 2 Or next time after you turn on the device run App to sync Notice The device can store maximum 4 records The oldest record will be overwritten when the 5th record is coming in Please sync data to your phone in time ...
Страница 4: ...smart phone Smart Vibration The vibrator in the sensor will be activated when the SpO2 fall below the preset value Threshold The vibration will stop when the SpO2 recover or you can press the button to stop it You can customize the vibration to help you sleep better Make sure your device is connected to App first Then you can configure it in App Settings You can switch on or off the vibration You ...