3
1
Introduction
1.1
Intended use
This Pulse Oximeter is intended to be used for measuring the
pulse oxygen saturation (SpO2), pulse rate of adults, children
and newborns in home or healthcare facilities environment.
1.2
Contraindications
No contraindications.
1.3
Warnings and Cautions
DO NOT twist the sensor and the wrap or apply excessive force on
them.
Do not use this device during MRI examination.
Do not store the device in the following locations: locations in
which the device is exposed to direct sunlight, high temperatures or
levels of moisture, or heavy contamination; locations near to
sources of water or fire; or locations that are subject to strong
electromagnetic influences.
Do not use the device in a combustible environment.
Never submerge the device in water or other liquids.
Do not clean the device with acetone or other volatile solutions.
Do not drop this device or subject it to strong impact.
The device and accessories are provided non-sterile.
Do not place this device in pressure vessels or gas sterilization
device.
Do not dismantle the device, as this could cause damage or
malfunctions or impede the operation of the device.
Consult your doctor immediately if you experience symptoms that
could indicate acute disease.
Do not self-diagnose or self-medicate on the basis of this device
without consulting your doctor. In particular, do not start taking
any new medication or change the type and/or dosage of any
existing medication without prior approval.
Use only cables, sensors and other accessories specified in this
manual.
Prolonged continuous monitoring may increase the risk of
