PIVOT POWER® SMART
|
USER MANUAL
|
V-0717 | PAGE 4
IMPORTANT SAFETY
INSTRUCTIONS / WARNINGS
CAUTION
To reduce the risk of electric shock, do not
remove cover (or back). No user-serviceable
parts inside. Refer servicing to qualified service
personnel.
WARNING
To reduce the risk of fire or electric shock, do not
expose this appliance to rain or moisture.
WARNING
Timer could turn-on unexpectedly without the
user being present. To Reduce the Hazardous
Condition – unplug the appliance that is plugged
into the receptacle(s) controlled by the timer
before servicing.
CAUTION
This unit must be connected to an outlet with a
protective grounded connection.
CAUTION
To completely disconnect this product from
power, disconnect the plug from the wall outlet.
The plug is used to completely disconnect the
power supply to the unit and must be within easy
access to the user.
CAUTION
To reduce the risk of electric shock, do not
perform any servicing other than that contained
in the operating instructions unless you are
qualified to do so.
IMPORTANT SAFETY INSTRUCTIONS
1 Read Instructions—
All safety and operating
instructions should be read before operating the
device.
2 Heed Warnings—
All warnings on the device and
in the operating instructions should be adhered to.
3 Follow Instructions—
All operating and safety
instructions should be followed.
4 Water & Moisture—
The device should never be
used in, on or near water for risk of electric shock.
5 Ventilation—
The device should always be located
in such a way that it maintains proper ventilation.
6 Heat—
Never locate the device near heat sources
such as radiators, floor registers, stoves or other
heat-generating devices.
7 Grounding—
DESIGNED FOR INDOOR USE ONLY!
The device should
ONLY
be
conne
cted to a
grounded outlet.
DO NOT
connect product to an
ungrounded outlet.
8 CAUTION:
Risk of Electric Shock. Do not plug
into other Relocatable Power Taps.
9 Power Cord Protection—
Power cables should
be routed so they are not likely to be stepped
on or crushed by items placed on them or against
them. Special attention should be paid to areas
where the plug enters a socket and where the
cord exits the device.
10 Cleaning—
Clean product with a damp soft cloth.
DO NOT
submerge Pivot Power Smart in water.
11 Periods Of Non-Use—
Make sure to unplug Pivot
Power Smart when it is not expected to be used
for several months.
12 Dangerous Entry—
Care should be taken that no
foreign objects or liquids fall or are spilled on or
inside the device.
13 Damage Requiring Service—
The device should
be serviced by licensed technicians when:
The internal electronic components have
been damaged.
Objects have fallen or liquid spilled inside
of the device.
The device has been exposed to moisture.
The device does not appear to be operating properly
or exhibits a marked change in performance.
The device has been dropped or becomes damaged.
14 Service—
The device should always be serviced
by licensed technicians. Only replacement parts
specified by the manufacturer should be used.
The use of unauthorized substitutions may result
in fire, shock, or other hazards.
15 When servicing:
Unplug any appliance that is
plugged into the power strip before servicing.
16 Caution–
Do not install this device if there is
not at least 10 meters (30 feet) or more of wire
between the electrical outlet and the electrical
service panel.
17 Pivot Power Smart
features an internal protection
that will disconnect the surge protective
component but will maintain power to the load –
now unprotected. If this situation is undesirable
for the application, follow the manufacturer’s
instructions for replacing this device.
18 Wi-Fi®
controlled receptacles are not to be used
with heater type devices (irons, space heaters,
coffee makers), medical equipment and other
types of devices that could pose a safety concern
if the receptacle inadvertently turns
ON
or
OFF
.
19 High power devices
such as air conditioners,
refrigerators and power tools should not be
plugged into a surge protected power strip like
Pivot Power Smart. Such devices are a common
