Read Instructions
Before Operating
MADE IN
CHINA
© 2016 VIATEK CONSUMER PRODUCTS GROUP, INC. All specifications are subject to change without notice. All rights reserved.
For customer service call 888.7.VIATEK (+1.423.402.9010 for outside the United States) or visit us online at
viatekproducts.com
Pour le service a la clientele appelez le 888.7.VIATEK (+1.423.402.9010 a l'extérieur des États-Unis) ou visitez
viatekproducts.com
Para servicio al consumidor llame al 888.7.VIATEK (fuera de Estados Unidos 1.423.402.9010) o visite
viatekproducts.com
PATENT PENDING
REV-
Model No.
DO NOT DISPOSE OF BATTERIES IN FIRE. ALWAYS DISPOSE OF BATTERIES PER LOCAL & FEDERAL GUIDELINES
Follow Us
Like Us
Viatek Site
Viatek Consumer Products Group, Inc. 6011 Century Oaks Dr. Chattanooga, TN 37416
011116
LL03-RG-16LED-R
Product Specifications
Laser Classification
Maximum Laser Power
Laser Wavelength
Laser MTBF
Power Consumption
Power Input
Operation
Operating Temperature
Maintenance
Remote Battery
Warranty
Class IIIa
(Single beam) Less than 5mW
Green: 532nm / Red: 660nm
More than 5000 hours
Up to 5 watts
120VAC (when used with supplied transformer)
Indoor / Outdoor
-4˚F to 86˚F
Maintenance free — no user serviceable parts
23A (L1028), included
Limited 1-year warranty
Notes:
� Only use supplied transformer connected to a properly grounded outdoor outlet.
� Do not use with dimmers.
� Operate in temperatures of -4˚F to 86˚F. There may be a slight delay if operating below 55˚F.
Please allow up to 10 minutes for light to warm up and reach its full projection. Green laser
startup time may take up to 30 minutes in temperatures below 14˚F.
� When hanging the laser light, for safety purposes it is recommended to mount using a sturdy
hanging clamp and safety cable.
� The laser light is weather resistant, but do not leave the laser or power supply transformer in
standing water. If using with an extension cord outdoors where the power supply transformer
may be exposed to weather, plug into a GFCI outlet only.
� Heavy snow can block the laser light. If heavy snow is expected, mount the laser light in such a
way that it will not be covered by snowfall.
