manualshive.com logo in svg

VIASONIX FALCON ABI Plus, Руководство по обслуживанию

Поделиться
Скачать
VIASONIX FALCON ABI Plus Скачать руководство пользователя страница 9

Falcon Service Manual 

___________________________________ 

 

9

 

2 – TECHNICAL INFORMATION 

 

2.1 

Overview 

 
This section outlines the basic technical features of the Falcon system.  The Falcon is a peripheral 
vascular system which is designed to be plugged to a host computer for operation.  The Falcon main parts 
consist of the main control board, an ultrasound unit with PCB mount Doppler connectors which is 
connected to the main board via a flat cable (not available with the Falcon/ABI+), and pneumatic units 
which primarily carry the inflating pumps.   
 
The host computer should have the following minimum requirements: Windows XP or 7 operating 
system, Intel® 3GHz Core™ 2 Duo processor, 2 GB memory, sound card and speakers, and at least 100 
GB remaining free disk space on the hard drive.   
 
Operator control over the system can be accomplished through the keyboard, mouse, remote control or 
foot switch which are connected directly to the computer, or through touch screen operation.  The system 
display should be 19’’ or higher wide screen with touch screen capabilities.  The recommended display 
resolution is 1280x720 pixels.  The display provides the user with direct visual feedback regarding the test 
performed, examination protocol, active sensors, examined site, signal display region, signal control 
buttons and settings, and measured parameters.   
 
 

2.2 

Falcon description 

 
 
A view of the front of the Falcon/Pro main console is given below.  Note that the right side of the Falcon 
is similar for all 3 systems.  The front panel, however, shows the system name and logo according to the 
specific Falcon system.  In addition, the black PPG connector (the most right PPG connector in the PPG 
connector row) is absent in the Falcon/Quad and Falcon/ABI+ systems.  Furthermore, the Falcon/ABI+ 
system also does not have the 3 Doppler connectors as displayed below.   
 
 

 

 
 
 

VS0152, rev 1.3

 

 

 

 

 

 

 

Page  

Содержание FALCON ABI Plus


































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды