VIANO VIA51HT, Руководство по эксплуатации для владельца

Страница: 19 / 30

If the DVD Player was connected to Home Theatre System through the 5.1 ch jacks and hearing from them, then:
~ Slide the 2.1/5.1 Selector on the rear of Home Theatre System main unit to 5.1 position.
~ Set the Audio Output in Audio setting menu to 5.1 as the figure below.
~ If the audio recording of playing DVD is 5.1, set the Pro Logic to OFF.
~ If the audio recording of playing DVD disc (or CD) is stereo recording, set the Pro Logic to ON then all
speakers with sound output. (If set to OFF, only Front Left and Front Right speakers have sound output).
Audio channel settings:
Playback of a DVD:
1. Press the POWER ON/OFF button on the DVD Player.
2. Press the Open/Close ( ) button to open the disc tray. Place the disc on the center of tray with
label side face up. Closed the tray by press the Open/Close ( ) button. The unit will start
playback automatically.
3. During playback:
~ Press the or buttons repeatedly to search for a specific section forward/backward.
Press Play button to resume normal playback.
~ Press the or buttons repeatedly to skip to specific track.
~ Press button on the unit or Pause button on remote control to pause, press button on the unit or
the Play button on remote control to resume normal playback.
4. Press STOP button to stop playback. The player will remember the point where disc was stopped. Press
Play button again, playback will start from this point. To stop playback completely or to start again
from the beginning, press STOP button twice.
NOTE: If the player will not be used for a long period of time, unplug the AC Cords of the DVD Player and
Home Theatre System from the wall outlet.
5. To power off, press the button to turn off the player “ O ” will appear on the display.
OPERATIONS
(For saving energy, always power off the DVD Player and Home Theatre System by press the Power
ON/OFF Switches to OFF position.)
17