VIAMED VM-2101 Скачать руководство пользователя страница 8

8

VM-2101  User Manual  Viamed Ltd. 2008

•  Turn equipment in the vicinity off and on to 

  isolate the offending equipment. 

•  Reposition or relocate the interfering equipment. 

•  Increase the distance between the interfering 

  equipment and the finger oximeter.

4.  Maintenance – Cleaning 

Maintenance

There are no user-serviceable parts inside the 

VM-2101. The housing should not be opened.

The finger oximeter requires no calibration. If service 

is  necessary,  contact  qualified  service  personnel  or 

your local sales representative.

 Caution

Do not spray, pour, or spill any liquid on the VM-2101 

as this may damage the finger oximeter.

Surface-clean

Use a soft cloth dampened with either a commercial, 

nonabrasive cleaner, or a solution of 70% alcohol in 

water. Lightly wipe the surface of the finger oximeter.

Disinfection

Use a soft cloth saturated with a solution of 10% chlo-

rine bleach in tap water. Lightly wipe the surface of 

the finger oximeter.

Attention! See instructions for use!

Manufacturer

Date of manufacture

Type BF

S/N

Serial number

P/N

Part number

Observe applicable waste disposal 

regulations 

European Union approval

5.  Symbol Definitions

6. Technical Specifications

Measurement Range:

SpO

2

: 0 to 100%

Pulse Rate: 20 to 300 beats per minute (bpm)

Accuracy:

SpO

2

: +/- 2% (70 to 100%)

Pulse Rate: +/- 1 digit ( ≤ 100 bpm); 

+/- 1% ( > 100 bpm)

Display :

•  OLED colour graphic display, 262,000 colours, 

  128 x 96 pixels

•  Data displayed: oxygen saturation, pulse rate, 

  plethysmogram, bar graph

•  Indicators: signal quality, pulse amplitude, 

  battery status

Environmental Conditions

:

•  Operating conditions: -20 to 50°C; 15 to 95% RH; 

  600 to 1300 hPa

•  Storage conditions: -30 to 70°C; 10 to 95% RH; 

  600 to 1500 hPa

Other:

•  Class IIa product 

•  Water-resistant construction IPX2

•  Type BF

•  Dimensions (L x W x H): 57 x 33 x 27 mm

•  Weight (including batteries): approx. 50 g 

•  Power Supply: 2 batteries (1.5 volt, AAA)

•  Battery Life: approx. 24h of continuous operation

Order Number:

0012101

Applied Standards:

EN 60601-1-2, BS EN ISO 9919:2005

7. Packing List

•  VM-2101, main unit

•  Lanyard

•  2 x AAA batteries, 1.5 volt

•  User manual on CD

Содержание VM-2101











Отзывы: