background image

Optional Accessories

 

Part Number

Description

0320200

Medirail Mounting Bracket

0121199

Swivel Mount

0121200

Universal Mounting Clamp

Cleaning and Decontamination

For routine cleaning, the Apgar timer can be cleaned with isopropyl alcohol,

or with a mild detergent solution in accordance with the detergent manufacturer’s 

recommendations.

For decontamination, clean in accordance with the guidelines in the MAC

Manual “Part 2; Cleaning (manual) - non-immersion”.

Warranty

Viamed warranty ensures that goods are free from defects of manufacture

for a period of one year from the date of shipment from Viamed.

Liability shall be limited solely to the replacement and repair of the goods

and shall not include shipping costs or other incidental costs.

The warranty does not cover damage caused by misuse, neglect, accidental

damage, or by repairs other than those performed by Viamed or an authorized 

service centre.

Disposal 

The Apgar Timer should be disposed of as WEEE (Waste Electrical and Electronic 

Equipment) in accordance with local ordinances and regulations, or it can be returned 

to Viamed. You are responsible for the return packaging and carriage costs, but we 

will process the returned WEEE free of charge on your behalf.

Please address to “WEEE Processing” at the below address

Viamed Limited 

 15 Station Road 

� Cross Hills

Keighley 

� 

West Yorkshire 

 BD20 7DT 

 United Kingdom

Tel:   +44 (0)1535 634 542 Fax:  +44 (0)1535 635 582

Email:  [email protected]  Website: www.viamed.co.uk

*0392000*

Specifications Subject to Change 

Operator’s Manual Part Number: 0392000

Apgar Timer Part Number: 0310100

Operator’s Manual - Digital Apgar Timer

V1.5 03/18

Содержание Apgar Timer







Отзывы: