4
85P OPERATING INSTRUCTIONS:
1. The compressor is designed to operate on 12 volts DC. To obtain power,
plug into power port.
2. Attach the end of the air hose to the tire valve stem.
3. Turn the compressor power switch to ON and begin to inflate tire.
4. When the pressure gauge indicates the desired pressure, switch the unit
OFF to check standing pressure and remove the air hose from the tire
valve stem if appropriate pressure has been reached. Otherwise, continue
to fill tire.
FOR ALL OTHER INFLATABLE OBJECTS:
1. A selection of inflation tips is provided to fit most inflatable objects.
Simply screw the appropriate nozzle into the tip of the air hose.
2. Attach the appropriate nozzle to article to be inflated and turn the power
switch to the ON position.
3. When article is inflated to desired firmness, turn the compressor off. Do
not over inflate.
CAUTION:
To avoid over inflation, never exceed recommended pressure on articles to
be inflated. Bursting articles can cause serious injury or death
MAINTENANCE INSTRUCTIONS:
Turn OFF and unplug air compressor. Use only mild soap and a rag
dampened with hot water to clean plastic parts. Avoid all other types of
detergents, cleaner, or solvents, which might contain chemicals that could
seriously damage plastic portions or painted surfaces of the compressor. All
other services should be performed by a qualified person.
