USER MANUAL
65C Air Compressor Kit
OPERATING INSTRUCTIONS
1. IMPORTANT: Always operate the compressor at or below the MAXIMUM PRESSURE RATING of
the compressor. Please refer to Application & Specifications Sections of this manual for details.
2. Always observe the MAXIMUM DUTY CYCLE of the air compressor. Refer to Compressor
Applications and Specifications Sections of this manual for details. Operation exceeding
maximum pressure ratings and/or duty cycle will result in damage to the air compressor.
3. To prevent discharge of your vehicle's battery, we strongly recommend that you keep the vehicle's
engine running while using the air compressor. ONLY OPERATE THE AIR COMPRESSOR
IN WELL-VENTILATED AREAS. Compressor performance is also enhanced when operating
compressor with vehicle's engine running.
MAINTENANCE & REPAIRS
1. Periodically check all electrical and fitting connections. Clean and tighten as needed.
2. Periodically check all mounting screws. Tighten as needed.
3. Regularly clean dust and dirt from compressor cooling fins and motor housing.
4. Your air compressor is equipped with permanently lubricated, maintenance-free motor.
Never try to lubricate compressor.
5. All repairs should be performed by Manufacturer or Manufacturer's Authorized Service
Agencies only.
CAUTION:
Never touch the air compressor or fittings connected to the air compressor with bare hands during
or immediately after use. The compressor will become very hot during and after use. If necessary,
wear heat resistant gloves.
PLEASE NOTE:
Use thread sealant for proper installation. Thread tape is not recommended.
Properly sealed, recommended torque for 1/8" NPT fittings is 10 to 11ft. lbs.
SPECIFICATIONS
• Part No. 00065 / 65C 12V Air Compressor
Motor Voltage:
12-Volts
Max. Current Consumption:
10-Amps
Recommended Fuse:
15-Amps
Motor Type:
Permanent Magnetic
Max. Working Pressure:
90 PSI*
Max. Duty Cycle (@ 72°F & 100 PSI): 15%
Max. Ambient Temperature:
140°F
Min. Ambient Temperature:
-4°F
Ingress Protection Rating:
IP54
* Do not exceed compressor's max working pressure to prevent damage to the compressor.
Содержание 65C
Страница 7: ...THIS PAGE INTENTIONALLY LEFT BLANK ...
