VIAIR 50044, Руководство пользователя

Страница: 5 / 16

TLC DUAL 444C OBA 1.5 GAL / 200 PSI
USER MANUAL
AIR TANK & PLUMBING
The tank comes with six 1/4" NPT port openings to allow installation in many configurations on your
vehicle. To ensure safe and trouble free use of your air tank, we strongly recommend that you install
the supplied drain cock and a safety pressure relief valve. (See Figure 1)
Tank Fittings:
Install the supplied fittings for the air tank in areas where they are most appropriate for your
installation using thread sealant. (Not all installations will be plumbed exactly as shown in schematic.)
Make sure that the safety valve is installed in the top most position on the tank, and that the drain
cock is installed in the lowest position on the tank if the tank is to be installed in any other position
than upright on the tank's mounting legs. Be sure that all fittings are accessible later in the installation
process since you will have to plumb air lines to each fitting as needed to utilize the air tank.
Plumbing Diagram:
(Figure 1)
P/N 20011
DUAL OBA PLUMBING DIAGRAM
Typical System Configuration, May Vary Depending on Installation
Tank
Drain
Cock
Safety
Valve
Pressure
Switch
Open Ports
Compression
Fitting
Quick Connect
Coupler
Adapter
Coil Hose
Leader Hose
From Compressor #2
Leader Hose
From Compressor #1
5
0
0
35
15
10 1
20
25
30
2
**Wiring Harness NOT included
P/N 20011
DUAL OBA PLUMBING DIAGRAM
Typical System Configuration, May Vary Depending on Installation
Tank
Drain
Cock
Safety
Valve
Pressure
Switch
Open Ports
Compression
Fitting
Quick Connect
Coupler
Adapter
Coil Hose
Leader Hose
From Compressor #2
Leader Hose
From Compressor #1
5
0
0
35
15
10
1
20
25
30 2
**Wiring Harness NOT included