background image

TIRE INFLATION & DEFLATION

IMPORTANT

:   Before   attaching   air   compressor 

power   clamps  to   your   vehicle’s   battery   terminals, 
check to make sure that the ON/OFF switch of your 
compressor   is   in   the   OFF   position.   Attach   the 
Positive   (+)   battery   clamp   (Red)   to   the   Positive 
terminal   of   the   battery   and   the   Negative  (-)  battery 
clamp (Black) to the Negative terminal of the battery. 
Always   keep   your   vehicle’s   engine   running   while 
operating   compressor   to   avoid   draining   your 
vehicle’s battery.

CAUTION

:

 

Your   Portable   Air   Compressor   is 

Moisture   and  Dust   Resistant,   but  NOT   WATER   OR 
DUST PROOF.  Never place  compressor in soft sand 
while   running  the   compressor.   Vibration   from   the 
compressor will cause the compressor to settle into 
soft sand, resulting in compressor drawing in foreign 
particles.   Never   expose   compressor   to   water   while 
running the compressor.

IMPORTANT:  

Make sure compressor sits upright 

while   operating  compressor.   Avoid   tugging   at 
compressor   if   line   is   taut.   Instead,   move   the 
compressor to the same side of vehicle as tires that 
are being aired up.

IMPORTANT

:

 

Always   make   sure   the   Portable 

Compressor’s  power   cord   is   uncoiled   and   fully 
extended  when using  your air compressor to avoid 
overheating the power cord.

Содержание 40045-400P-A









Отзывы: