Viadrus Space Energy 300V, Инструкция по установке и эксплуатации

Страница: 32 / 40

32
Specifications: VIADRUS Space Energy V collectors
Description Kolektor VIADRUS Space Energy V
Width/lenght/depth mm 1105 x 1937 x 121
Flow pipes mm
1 x Ø15 x 1 x 1110
2 x Ø15 x 1 x 1070
9 x Ø6 x 0,5 x 3560
Mase of empty collectors kg 33
Cubic capacity of liquid in collector l
1,06
Number of glass tubes
9
Gross surface of collector m
2
2,140
Active surface m
2
1,897
Connector pipes 15
Coefficiency factor
η
o
0,568 *
Maximum working pressure MPa 0,6
Agent flux through collector l./min 1
Heat loss coefficiency a1 W/ (m
2
K) 1,24
Temperature depence of the heat
loss coefficiency a2
W/ (m
2
K
2
) 0,0038
Maximum stagnation temperature
O
C 281
Insulation vacuum, mineral wool
Vacuum tube mm Borosilicate glass 3.3 – 47 x 37 x 1,6 x 1800
Aluminium mirror Highly reflective anodized aluminum
Housing aluminium
Space Energy Dimensions Hydraulic diagram
CAUTION !!!
Before the system put into operation, the solar collector must be covered to protect the absorber
from overheating. The system should be filled only when the collector hydraulic system is assembled and
cannot be put into operation until there is possibility to carry away heat generated by the solar collector.
It is obligatory to use the solar fluid (propylene glycol) provided by the manufacturer. Warranty is not
valid, if the collector is filled with water or medium whose parameters differ from those of glycol
provided by VIADRUS.