Viadrus OV 100 L, Руководство по эксплуатации и установке

Страница: 3 / 20

3
Dear customer,
we thank you that you have bought the VIADRUS OV100 L water heater thus having shown your
confidence in VIADRUS a.s..
For you to get used to a correct way of handling your new product from the beginning please read at
first this manual for its usage (first of all the chapter no. 6 – Heaters operation by users). Please
follow the undermentioned information especially the prescribed annual inspections carried out by
an authorized firm in order to guarantee a long-time and trouble-free heater operation to both your
and our satisfaction.
1. Use and advantages of heater
Indirectly heated accumulation water heater is intended for hot service water preparation in family houses,
cottages, premises, workshops, shops. In case of VIADRUS OV 100 L stationary heater the service water is
heated by heating water by means of a spiral heating wire. In case of an increased HWS (Hot Service
Water) consumption the reservoir heats the water continually and in works like a flow heater.
VIADRUS OV 100 L stationary water heater is preferentially intended for boiler VIADRUS GARDE G 42 and
VIADRUS GARDE G 42 ECO, possibly VIADRUS CLAUDIUS K 2. Its design corresponds to design of
boilers and the boiler electric connection enables a preferential HWS heating.
Accumulation water heater advantages:
1. Uniform heating.
2. Internal surface protected by double layer of enamel
3. Adjustable service water temperature.
4. Economical operation
5. Service water heated quickly.
6. Easy assembly and operation
7. Compared to the flow heaters they enable to draw off the service water simultaneously at several points.
2. VIADRUS OV 100 L technical data
Tab. no.1
VIADRUS OV 100 L hater thermal data
Heater volume l 100
Heater (spiral heating wire) heat output kW 23
Heat transfer surface of the heater m
2
0,9
Connections: - heating water Js 3/4“
- hot service water Js 1/2“
Heater dimensions: - height mm 886
- width mm 574
- depth mm 587
Weight kg 60
Nominal overpressure of heater MPa (bar) 0,4 (4)
Maximum working overpressure for HWS MPa (bar) 0,6 (6)
Setting range °C 0 – 90 ***)
HWS time of heating from 10 °C to 60 °C
Boiler output 26,5 kW and heating water temperature 85 °C) *)
Boiler output 16 kW
Boiler output 49,5 kW
min
14
21
14
HWS flow (boiler output 26,5 kW) **) l/h 610
HWS flow (boiler output 16 kW) **) l/h 368
HWS flow (boiler output 49,5 kW) **) l/h 1139
Connection voltage 1/N/PE 230 V AC 50 Hz TN–S
Electric coverage IP 40
Environment
normal,
pursuant to
Č
SN 33 2000-3