background image

 

3

Dear customer, 

we thank you that you have bought the VIADRUS HERCULES ECO automatic boiler thus having 

shown your confidence in ŽDB GROUP a.s., KKCG Industry Group member, VIADRUS division 

For you to get used to a correct way of handling your new product from the beginning please read 

at first this manual for its usage (first of all the chapter no. 8 – Boiler operation by user, chapter no. 9 
– Important notes and chapter no. 10 – Maintenance by user). Please follow the undermentioned 
information in order to guarantee a long-time and trouble-free boiler operation to both your and our 
satisfaction. 

 

1.   Produced boiler variants  

1.1   Purchase order  

 

In the purchase order there must be specified: 

 

Purchase order specification code  

VIADRUS HERCULES ECO X  

 

1. Boiler design (defined by the fuel reservoir position against the boiler drum 

in the front view)

- left version 
- right version 

 

2. Optional accessories (see chapter 4.4.) 

 

 

!

ATTENTION! The fuel reservoir isn’t included in standard boiler accessories! 

 

The version of the boiler you received is only intended for combustion of wooden pellets (see the 

specification page 5) and its trade name is 

VIADRUS HERCULES ECO.

 

The boiler is manufactured as in warm-water design with forced heating water circulation and operating 

overpressure up to 400 kPa. Before dispatch it is checked for tightness by applying 800 kPa test 
overpressure. 
 

2.   Boiler usage and advantages  

 

Usage: 

 

¾

 

5-sectional design of 

VIADRUS HERCULES ECO boiler is preferentially intended for heating the 

individual housing units, cottages, weekend houses, office buildings, small premises, smaller leisure 
amenities, etc. 

¾

 

10- sectional design of 

VIADRUS HERCULES ECO boiler is preferentially intended for heating the 

medium size buildings- shops, schools, leisure amenities, medium size premises, big cottages etc. 

 

Boiler advantages: 

 

¾

  automatic operation controlled by an indoor device that guarantees a comfortable heating  

¾

  mechanical fuel supply from any reservoir  

¾

  simple, not time-consuming operation and maintenance 

¾

  high efficiency achieving up to 84 % 

¾

  low emissions complying with the values defined by 

„Environmentally friendly product” 

 

¾

  depending on boiler room disposition there can be chosen either the left-or right-hand side boiler version 

(given by the fuel reservoir position) 

¾

  boiler drum verified on a long-term basis  

¾

  high service life of the cast-iron boiler drum  

¾

  boiler drum guarantee 5 years 

Size: 
  5: 

5 sectional design  

10:

 10 sectional design 

Содержание HERCULES ECO 10









































Отзывы: