background image

3.  Flip out safety lock and remove lid retainer clamp. 
4.  Remove the lid of the filter. Handle with care. The UV bulb and quartz sleeve is made of glass. 
5.  Remove the intake and output flares. 
6.  Remove and rinse foam pads. Replace them if necessary. 
7.  Remove the bio-chamber and rinse well with pond water only. Biological media beneficial bacteria will

be killed if tap water is used to rinse. 

8.  Remove and rinse pre-filter foam pads. Replace them if necessary. 
9.  Rinse and clean the filter body. 
10.  Place the filtering media back in their original locations. Replace intake and output flares.  
11.  Replace o-ring and verify that it is clean. We recommend using a small amount of silicone lubricant

on the o-ring to ensure a proper seal. 

12.  Secure lid with lid retainer clamp. The lid retainer clamp must be aligned so that the notches in the

top of the clamp fit under the intake and discharge port. 

13.  Filter is ready to use. See installation instructions. 

REPLACEMENT OF UV BULB (UV Model)

1.  Follow all the safeguards and warnings of the manufacture. 
2.  Before doing any maintenance on the UV sterilizer, the power supply and water supply must be

disconnected. 

3.  Only in rare situations does the quartz sleeve ever have to be removed. If necessary loosen screws

carefully, then remove the quartz sleeve. If excess force is used the quartz sleeve will break. After
removed, use a soft clean cloth to gently remove any excess grim and/or debris. Reassemble using a
small amount of silicone lubricant placed on the o-ring prior to sliding it into the main body of the UV
sterilizer.  

4.  The UV bulb needs to be replaced every 8,000 to 9,000 hours. This will ensure optimum performance. 
5.  The efficiency of the Terminatorâ„¢ UV Sterilizer depends on the duration the UV light is in contact with

water. Thus the rate of water flow, not the way the water travels, will relate to the efficiency of the UV
sterilizer. 

     

   

 Number pieces in packaging:1 Number pieces in box:2       

   Customer Reviews:  There are yet no reviews for this product. 

Please log in to write a review.

Copyright ©2022  -  SeaSun aquarium  -  

https://seasunaquarium.com/shop

_PN_PAGE 8 _PN_OF 9

Содержание EF-3000UVC










Отзывы:

Похожие инструкции для EF-3000UVC