34
Shutdown Temperature
This item can let users setting the Shutdown temperature, when CPU temperature over this
setting the system will auto shutdown to protect CPU.
Current CPU Temperature/Current System Temp/Current SFAN1, SFAN2 ,CPUFAN
Speed/Vcore/ +1.5V/+5V/+12V/+5 VSB(V) /VDIMM/VCC3/3.3SUS/VBAT(V)
This will show the CPU/FAN/System voltage chart and FAN Speed.
3-11 Miscellaneous Control
Phoenix – AwardBIOS CMOS Setup Utility
Miscellaneous Control
Item Help
Auto Detect PCI CLK Enabled
Spread Spectrum Disabled
*** Current Host Frequency is 100MHz***
CPU Clock at Next boot is 100MHz
***Current DRAM Frequency is 333MHz***
DRAM Clock at Next Boot is SPD
CPU Clock Ratio 8X
Vcore voltage Default
VCC1.05 Voltage 1.05v(Default)
VCC 1.5 Voltage 1.50v(Default)
VDIMM Voltage 1.84v(Default)
Menu Level >
↑↓→←
Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
Auto Detect PCI Clock
This item allows you to enable/disable auto detect PCI Clock. The settings are: Enabled, Disabled.
Spread Spectrum
This item allows you to set the Spread Spectrum Disabled or choose a setting in the category
of+/-0.1%~+/-0.9%.
CPU
Clock at Next Boot
Users can Page Up and Page Down or change the value. The optional range is from 100 MHz to
133MHz.
DRAM Clock at Next Boot
