VIA Technologies VTS-8589, Руководство пользователя

Страница: 15 / 29

VTS-8589 User Manual
8
2.1.2. Gigabit Ethernet Port
The VTS-8589 is equipped with Gigabit Ethernet port. The Gigabit Ethernet port is using 8 Position 8
Contact (8P8C) receptacle connector or commonly referred to as RJ-45. It is fully compliant with IEEE
802.3 (10BASE-T), 802.3u (100BASE-TX), and 802.3ab (1000BASE-T) standards. The pinout of the Gigabit
Ethernet port is shown below.
1 8
Figure 10: Gigabit Ethernet port diagram
Pin Signal
1 L
2 LAN1_TD0-
3 L
4 LAN1_TD1-
5 L
6 LAN1_TD2-
7 L
8 LAN1_TD3-
Table 2: Gigabit Ethernet port pinout
The Gigabit Ethernet port (RJ-45) is equipped with two LED indicators on the front side to show its
Active/Link status and Speed status.
Active LED
(Left LED on RJ-45 port)
Link LED
(Right LED on RJ-45 port)
Link Off LED is off LED is off
Speed_10Mbit Flash in Orange color LED is off
Speed_100Mbit Flash in Orange color The LED is always On in Red color
Speed_1000Mbit Flash in Orange color The LED is always On in Green color
Table 3: Gigabit Ethernet port LED color definition
2.1.3. USB 2.0 Port
The VTS-8589 is equipped with two USB 2.0 ports. Each port gives complete Plug & Play and hot
swapping capability for external devices. The USB interface complies with USB UHCI, Rev. 2.0. The pinout
of the USB 2.0 ports are shown below.
1 4
Figure 11: USB 2.0 port diagram
USB 2.0 port 1 USB 2.0 port 2
Pin Signal Pin Signal
1 VCC 1 VCC
2 USB1_data- 2 USB2_data-
3 US 3 US
4 GND 4 GND
Table 4: USB 2.0 port pinout