Page 11 of 85
viasis 3003 user manual
via
traffic
controlling
gmbh
If the connection is established successfully, the viasis main menu appears in the white terminal
input/output area of the viagraph window, see illustration 11.
Illustration 11: Viagraph connection window with viasis main menu in the terminal
Top left the type of the found viasis system is shown, e. g. viasis, viasis PLUS, viasis PLUS
SMILE, etc. Depending on the viasis type and equipment appears one or more buttons below.
The buttons
Read data
and
Settings
appear always for viasis 3003 systems, the button
Matrix
is only shown for viasis 3003 PLUS devices.
By a click in the input/output terminal area (white background) you may make insertions by
your computers keyboard to the viasis menu system directly. Menus, messages and responses
from the viasis are displayed then in the terminal area.
The more comfortable way to change viasis parameters is to click the
Settings
button, respectively the
Matrix
button if you want to change parameters and text
pages of a viasis PLUS.
In case you connected to a viasis with GSM/SMS/Email function by serial RS232 cable, an
Email or SMS transfer may occur while you are connected. The text “
Send Email/SMS...”
may appear in you terminal window. Please make no insertions further on, respectively do not
click any buttons in viagraph until you see the transfer closing message “
Email/SMS ok
”.
More information about
viagraph
you will find in its online help
1
menu
Help – Manual
.
1
To read the viagraph online manual requires an installed Adobe Acrobat Reader Version 3.0 or higher. You
may obtain it from Adobe by the Internet on the website
