VIA Technologies K8T890 Скачать руководство пользователя страница 57

Страница: 57 / 80

S-ATA RAID Configuration

Page 5-3

VIA S-ATA RAID Features

The VIA S-ATA RAID solution uses the VT8237R chip as a RAID controller, which
is a 2-channel S-ATA solution. Listed below are the main features and benefits of
VIA S-ATA RAID:

• Support two S-ATA hard disk drives.

• Supports hard disk drive larger than 137 GB (48-bits LBA).

• Supports RAID 0, 1 and JBOD.

• 4 KB to 64 KB striping block size support.

• Bootable disk or disk array support.

• Windows-based RAID configure and management software tool. (Compatible

with BIOS)

• Real-time monitoring of device status and error alarm with popup message box

and beeping.

• Mirroring automatic background rebuilds support.

• ATA SMART function support.

• Microsoft Windows 98, Me, NT4.0, 2000, XP operating systems support.

• Event log for easy troubleshooting.

• On-line help for easy operation for RAID software.

Содержание K8T890

















































































Результаты поиска

Содержание K8T890

Отзывы:

Бренды по названию

Популярные бренды

VIA Technologies K8T890, Руководство пользователя

Результаты поиска

Содержание K8T890

Отзывы:

Бренды по названию

Популярные бренды