VIA Technologies K8T800, Руководство пользователя

Страница: 71 / 96

S-ATA RAID Configuration
Page 5-7
Method 2
1. Locate another computer and insert the bundled CD into its CD-ROM drive.
2. Enter DOS mode and change directory to D:\DRIVER
3. Insert a blank floppy into the A:drive
4. Run the batch file “cbf_dos.bat” located in D:\DRIVER
5. Select the appropriate RAID controller to begin copy into the floppy
Step 3: Install O/S into RAID disk
Continue to install Windows XP/2000/NT4.0 as normal. When requested by
Windows Setup for RAID
driver, insert the floppy created earlier in Step 2.
Step 4: Install Software utility for Windows
After the O/S has been installed, you may install the RAID driver and software. The
RAID software is a Windows-based utility with graphical user interface that
provides an easy operating tool to configure and manage RAID arrays.
1)Insert the bundled CD into the CD-ROM drive.
2)When the main menu appears, click on the SATA RAID driver corresponding
to the SATA controller you have configured in Step 1. See driver installation in
section 6 for more details.
Note : For information on using the software utility, refer to the user guide in
the bundled CD.