BIOS Setup
3-7
IDE Primary Master/Slave, Secondary Master/Slave
Press
Enter
to enter the sub-menu and the following screen appears:
The specifications of your drive must match with the drive table. The hard
disk will not work properly if you enter improper information for this
category. Select
Auto
whenever possible. If you select
Manual
, make sure the
information provided is from your hard disk vendor or system manufacturer.
IDE <Primary
Master>
The name of this menu item will match the
name of the menu. The settings are
None
,
Auto
,
Manual
.
Access Mode
The settings are
CHS
,
LBA
,
Large
,
Auto
.
Capacity
The formatted size of the storage device.
Cylinder
Number of cylinders.
Head
Number of heads.
Precomp
Write precompensation.
Landing Zone
Cylinder location of the landing zone.
Sector
Number of sectors.
PIO Mode
The settings are
Mode 0/1/2/3/4
,
Auto
.
Ultra DMA Mode
The settings are
Disabled
and
Auto
.
