VIA Technologies EPIA-PD Mini-ITX, Руководство пользователя

Страница: 43 / 71

BIOS Setup
35
First/Second/Third Boot Device
Set the boot device sequence as BIOS attempts to load the disk operating
system. The settings are:
LS120 The system will boot from LS-120 drive.
HDD-0 The system will boot from first HDD.
SCSI The system will boot from SCSI.
CD-ROM The system will boot from CD-ROM.
HDD-1 The system will boot from second HDD.
HDD-2 The system will boot from third HDD.
HDD-3 The system will boot from fourth HDD.
ZIP100 The system will boot from ATAPI ZIP drive.
USB-FDD The system will boot from USB floppy drive.
USB-ZIP The system will boot from USB ZIP drive.
USB-CDROM
The system will boot from USB CDROM.
USB-HDD
The system will boot from USB HDD.
LAN
The system will boot from network drive.
Disabled
Disable this sequence.
Boot Other Device
Enable the system to boot from other devices if the system fails to boot from
the First/Second/Third boot device. Settings: Enabled and Disabled
Boot Up NumLock Status
Set the NumLock status when the system is powered on. On will turn key pad
into number keys, and
Off
will turn key pad into arrow keys. Settings:
On
and
Off
Typematic Rate Setting
When
Disabled
, the following two items (Typematic Rate and Typematic
Delay) are irrelevant. Keystrokes repeat at a rate determined by the keyboard
controller in your system. When Enabled , you can select a typematic rate and
typematic delay. Settings: Enabled and Disabled
Typematic Rate (Chars/Sec)
When Typematic Rate Setting is enabled, this item allows you to set the rate
(characters/second) at which the keys are accelerated. Settings:
6, 8, 10, 12,
15, 20, 24
and
30