VIA Technologies EPIA-P910, Руководство пользователя

Страница: 61 / 67

VIA EPIA-P910 User Manual
51
Appendix A. Installing Wireless Accessories
This chapter provides you with information on how to install the VIA EMIO wireless module into the VIA
EPIA-P910. It is recommended to use a grounded wrist strap before handling computer components.
Electrostatic discharge (ESD) can damage some components.
A.1. Installing the VIA EMIO-1533 USB Wi-Fi Module
Step 1
Mount the VIA EMIO-1533 module to the prepared standoff in the chassis. Align the two mounting holes
on the VIA EMIO-1533 module with the mounting holes on the standoffs. And then secure the VIA EMIO-
1533 module in place with two screws.
Figure 51: Installing the VIA EMIO-1533 module to the chassis
Step 2
Connect one end of USB Wi-Fi cable to the onboard USB 2.0 connector (WLAN) on VIA EPIA-P910-A I/O
expansion card, and then connect the other end of the cable to the VIA EMIO-1533 module.
Figure 52: Connecting the USB Wi-Fi cable (VIA EMIO-1533)
Note:
Make sure the VIA EPIA-P910-A I/O expansion card is installed on the VIA EPIA-P910 before installing the VIA
EMIO-1533 module.