VIA Technologies EPIA-NL, Руководство пользователя

Страница: 17 / 79

Installation
9
M
EMORY
M
ODULE
I
NSTALLATION
The VIA EPIA-NL Nano-ITX mainboard provides one 200-pin SODIMM slot for
DDR266/333/400 SDRAM memory modules.
DDR SDRAM Module Installation Procedures
•
Make sure the notch is on the proper side.
•
Insert the memory module into the slot at a
30 degree angle (30 degrees from the
board). It should lightly snap into place.
•
Push the module up against the board and
release your finger when the clips lock the
module.
Available DDR SDRAM Configurations
Refer to the table below for available DDR SDRAM configurations on the
mainboard.
Slot Module Size Total
SODIMM 64MB, 128MB, 256MB, 512MB, 1GB 64MB-1GB
Maximum supported system memory 64MB-1GB