VIA Technologies EPIA-LT, Руководство пользователя

Страница: 22 / 70

Chapter 3
14
C
ONNECTORS
Hard Disk Connectors: IDE1
The mainboard has a 32-bit Enhanced IDE and Ultra DMA 133/100/66
controller that provides PIO mode 0~4, Bus Master, and Ultra DMA
133/100/66 functions. You can connect up to four hard disk drives, CD-ROM
and other devices.
1
IDE1
Serial ATA Connectors: SATA1 and SATA2
These next generation connectors support the thin Serial ATA
cables for primary internal storage devices. The current Serial
ATA interface allows up to 150MB/s data transfer rate, faster
than the standard parallel ATA with 133 MB/s (Ultra DMA).
USB Pin Connector: USB
The mainboard provides one USB pin header, allowing up to 2 additional
USB2.0 ports up to maximum throughput of 480 Mbps. Connect each 2-port
USB cable into this pin header. This port can be used to connect high-speed
USB interface peripherals such as USB HDD, digital cameras, MP3 players,
printers, modem and the like.
Pin Signal Pin Signal
1 VUSB0 2 VUSB0
3 USBD_T0- 4 USBD_T1-
5 6
7 GND 8 GND
9 Key 10 GND
SATA1-2
USB
1 2
9
10