VIA Technologies EPIA-EN, Руководство пользователя

Страница: 53 / 86

BIOS Setup
45
A
DVANCED
C
HIPSET
F
EATURES
: Move
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
Menu Level
If there are display cards on
both AGP and PCI slots,
configure this item for BIOS to
select which one to boot
Item Help
Advanced Chipset Features
Phoenix - AwardBIOS CMOS Setup Utility
Display Card Priority
AGP & P2P Bridge Control
CPU & PCI Bus Control
Select Display Device
Panel Type
HDTV Display
TV H/W Layout
TV Type
TV Output Connector
HDTV Type
HDTV Input Mode
[PCI Slot]
[Press Enter]
[Press Enter]
[CRT]
[07]
Disabled
[Default]
[NTSC]
[Press Enter]
HDTV 720P
RGB Input
AGP Driving Control
[Auto]
AGP Driving Value
DA
Caution:
The Advanced Chipset Features menu is used for optimizing the chipset
functions. Do not change these settings unless you are familiar with the
chipset.
Display Card Priority
This setting specifies which VGA card is your primary graphics adapter.
Settings: [PCI Slot, AGP]
AGP Driving Control
This item is used to signal driving current on AGP cards to auto or manual.
Settings: [Auto, Manual]
AGP Driving Value
Key in a HEX number.
Settings: [Min = 0000, Max = 00FF]
Select Display Device
This setting refers to the type of display being used with the system.
Settings: [CRT, LCD, CRT + LCD, TV, CRT + TV, LCD + TV, DVI, CRT + DVI,
TV + DVI]