VIA ARTiGO A950 Quick Start Guide
5
2. Hardware Installation
2.1 System Installation
Check the following and install the VIA ARTiGO A950 system on the target surface:
• The target surface is flat, reliable and away from direct sunlight.
• A power source with a Japan-type socket is available nearby and it supports the provided 100 ~ 240V
AC-to-DC power adapter.
• The environmental temperature is within the 0 ~ 60°C range.
2.2 Wi-Fi/BT Antenna Installation
The VIA ARTiGO A950 system's standard package includes 3 Wi-Fi/BT antennas.
Figure 06: A Wi-Fi/BT antenna
To install the Wi-Fi/BT antennas on the VIA ARTiGO A950 system, follow the steps below:
Step 1
Locate the Wi-Fi antenna connector on the VIA ARTiGO A950 system's left panel.
Step 2
Gently screw an antenna on the Wi-Fi antenna connector and fold it upwards for the best reception.
Figure 07: Installing a Wi-Fi antenna on the system's left panel
Step 3
Locate the Bluetooth and Wi-Fi antenna connectors on the VIA ARTiGO A950 system's right panel.
