NDI 4K Video Conference Camera User Manual
17
2) Lan
Settings(NDI)
Default the IP address is 192.168.100.90.
3) Port
Settings
A. HTTP Port
IP address identifies the network device, the
device can run multiple web applications, each
network program using network port to
transmit data, so data transmission to be
carried out between the port and port. Port
setting is to set up web server program using
which port to transmit. When port mapping,
need to be consistent with the port number
(default port: 80).
B. RTSP Port
The video conference camera support RTSP
protocol, use the VLC tools broadcast, default
port: 554.
C. PTZ Port
Support TCP connection then control camera,
default port: 5678.
D. UDP Port
Support UDP protocol, default port: 1259.
4) SRT
Settings
Turn On/Off SRT, setting the SRT Port,
SRT Encry and SRT Password.
5) Control Protocol Settings
Setting the camera control communication
protocol, include Visca address, Pelco-D
address and Pelco-P address.
6) RTMP(S)
Settings
Setting the MRL of RTMP, select enable or
disable video and audio. You can select control
code stream of “On”, “Off”, “Video”, “Audio”
between in the two streams.
7) RTSP
Settings
Turn On/Off RTSP auth.
8) ONVIF
Settings
Turn On/Off ONVIF and ONVIF auth.
9) Multicast
Settings
Turn On/Off multicast. Setting the multicast
address (default value is 224.1.2.3) and port
(default value is 6688, then 6688 is the
multicast port of the first stream; 6690 is the
multicast port of the second stream).
10) SDK Settings
Turn On/Off active connection. Setting SDK
address (default value is 192.168.100.138)
and port (default value is 1234).
11) NTP Settings
Turn On/Off NTP time sync, main time show
and sub time show. Setting NTP server
address, time interval, main stream position
and sub stream position.
6.6.7 NDI® Config
1) NDI®
Config
Display the Device Name.
2) NDI®
Stream
Turn On/Off NDI® Source Stream, setting the
Group Name, Source Name and output
resolution.
