VGEM000-GB192
VGE International B.V.
●
Ekkersrijt 4304
●
5692 DH Son Netherlands
●
+31 499 461099
●
●
www.vgebv.nl
Pag. 27/68
Installation & User Manual
4.3 UV system composition
A VGE Pro UV system is always composed of a UV irradiation chamber and a control panel, both of which
are interconnected with supplied cables for controlling the UV lamp. The irradiation chamber must also be
grounded.
The heart of the UV system is the irradiation chamber which is provided with one medium-pressure UV
lamp which combines a compact design with a high lamp power. An inline design of the irradiation chamber
has been chosen with a UV lamp placed perpendicular to the direction of the flow in order to obtain good
irradiation of the water in combination with a very low hydraulic pressure loss.
The choice of the irradiation chamber, the UV lamp type and the number of lamps is tailored to the
application in order to realize a reliable irradiation of the water with the least possible loss of pressure.
The control panel controls the UV lamp through an electronic ballast with high efficiency. The control panel
also ensures that it is not possible to switch the UV lamp on again immediately after switching off (10
minutes waiting time) and when the end of the UV lamp life is approaching, an indicator LED will flash.
Attention!
After switching on the unit locally, via a remote signal or flow switch, it will always
takes approx. 10 minutes before the UV lamp is switched on.
