VFTech GNOM STANDARD, Руководство оператора

Страница: 20 / 42

v07/2020
20
6. MAITENANCE OPERATION
To maintain the vehicle, always perform the following steps:
•
clean the propellers from algae, sand and mud
•
rinse the vehicle in the fresh water after using in the sea
•
inspect the cable after the operation. In case of any damages, the cable must be
repaired or changed
•
check the magnetic disk coupling regularly
•
use the silicon oil spray to lubricate the propeller shafts every time after diving. Oil
must get inside the conical heads of motors. See appendix position 96, 147, 217 of
thrusters assembly.
•
Avoid nods and twists on the cable.
Within the certificate of warranty, the bond (joint) maintenance manual is included.
Use it only in case of emergency, if standard maintenance is insufficient.
Before this service, consult technical problems in our company on email address:
odbyt@vftech.sk
.
Attention:
In case of non-professional action and damage of any part, the consecutive service in our
company
will be charged .