VFTech GNOM BABY, Руководство оператора

Страница: 7 / 32

v09/2020
7
2. USER’S MANUAL FOR OPERATION
The central cable wire has 48V voltage! In case of any damage, repair
or change the cable!
2.1. Before using, check up all parts of the vehicle, especially the propellers, the cable and the
dome. Clean the vehicle if necessary, check the propeller rotation.
2.2. If necessary, adjust the buoyancy of the vehicle by adding additional weights on the plastic
feet (Note that the cable weight in water is approximately 2 g/m).
2.3. Plug the 3-pin connector to the reel and video cable to the monitor video input. If you work
from 230 VAC, connect the AC power cable.
Do not rotate thrusters on air!
Do not switch lights on a full power on air!
Be very careful with the cable, do not:
•
Stand on it
•
Press on it
•
Twist it
2.4. If use any additional display or audio/video recorder, connect the video cable to RCA jack of
additional video device.