4.
Route the cables through the cable hole according to the
actual needs, and connect the corresponding cables including
power cable, network cable, audio and alarm cables, etc.
5.
Align the triangle mark on the camera and base plate, and
then rotate the camera clockwise until it is locked up by the
three bayonet joints on the base plate.
6.
Re-install the main body of the bracket to the mounting base,
and fix it with the screw.
7.
To disassemble the camera, refer to the
Step 5 in Section 2.1
.
8.
To adjust the view angle, refer to the
Step 6 in Section 2.1.
