USING ON DRY CELL
BATTERIES
A
Open the battery compartment and insert two LR6
(size AA) alkaline batteries with the and marks
correctly aligned.
The battery indicator in the display according
to the remaining power of the batteries. Replace
the batteries when lights. If the unit remains in
use after lights. the operation will stop.
Note on dry cell batteries
Do not mix the different types of batteries, or an
old battery with a new one
To prevent the risk of electrolyte leakage or
explosions. never recharge the batteries, apply
heat to them, or take them apart
When not using the batteries, remove them to
prevent needless battery wear
If liquid leaks from the batteries, wipe thoroughly
to remove
Battery replacement
If the cover of the battery compartment
comes off you should insert it by bands
please picture
B
BEFORE PLAYBACK
HOLD switch
Turning on and off
Turning the power on
Turning off the power
Standby mode
Release the HOLD switch to OFF position before
playback.
When not using the unit, set the HOLD switch to
the ON position, Accidentally pressed button will
not function. If buttons are pressed when the HOLD
switch is set to the ON position. "HOLD" light on
the display.
Press PLAY/PAUSE. Power is turned on and
playback starts.
If no new operations are done within 30 seconds
from the end of last operation, the power is turned
off automatically. (Auto power off function) you can
turn off the power before it is automatically turned
off by pressing STOP
When an operation finishes, the unit goes into
Standby mode until the auto power off function
automatically turns off the power.
To enter standby mode, press PLAY/PAUSE to
start playback, then press STOP
C
C
C
AA (LR6)X2
A
B
C
2
Содержание VX3849
Страница 8: ...SUBJECT TO MODIFICATION WITHOUT NOTICE ...