32
FLX-20
™
OPERATION
Mode Control
Control advanced features, such as zoom, power and color.
CS > Color Select Mode
Use this mode when you need to adjust the color palette. The
FLX-20 will keep your choice even after you turn the unit off.
See page 34
LP > AZ: Low Power Auto-Zoom
This mode splits the screen into Zoom Mode and uses a lower
power level. Use this in deeper weedy or turbulent waters.
LP: Low Power
This mode uses the standard display, but at the lower power
setting. Use this mode in shallow or weedy waters.
NORM: Normal Mode
Normal Mode uses full power and the full display. Use this for
normal viewing and for a reliable starting point.
AZ: Auto Zoom
This mode splits the screen into 6' Zoom Mode at normal power.
Use this mode for normal ice fishing conditions in deeper waters.
AZx2: 12' Auto Zoom
This mode splits the screen into 12' Zoom Mode at normal
power. Use this mode for normal ice fishing conditions where
the fish are higher off the bottom than 6 feet.
Deep Mode
To activate the 300’ Deep Water ranges, turn the Gain setting to “1.”
Then press the Gain knob in while you power on the unit. This triples
the standard depth ranges. Now the display will start out at the 0–30 foot
range, the x2 is 0–60, the x3 is 0–90, the x4 is 0–120, the x8 is 0–240 and
the x10 setting is a 0–300 foot display on the dial. Turning the unit OFF
will revert the ranges back to normal.
Know your depth! The 0–10 foot scale allows for an easy system to get
your depth reading. If the signal shows the bottom at 6', then look at the
Range control multiplier and do the math. If you are on the x3 setting,
then the bottom reading is 6 x 3, or 18 feet: it’s that simple!
IMPORTANT
Zoom should be activated only when the transducer is submerged. If
the zoom is activated and operating before the transducer is placed in
the water, such as when moving from hole to hole when ice fishing, the
bottom may not line up correctly with the zero mark on the zoom scale.
If this happens, switch the flasher to Normal Mode and then back to
Zoom to reset the feature.
Содержание FL-18
Страница 2: ......