On-Site Manual
VEX-FLEXI-MINILINE
Drawing Number: 005898
Page
7
of
11
Led Ready Profile Installation
LED profile installation is achieved by first sticking the VEX-FLEXI-MINILINE into the profile using the
tape installation method above, ensuring to clean the profile. Then use the supplied profile
brackets/clips to fix the Luminaire to the desired surface.
Fix mounting clips to the required surface using appropriate screws (Vexica do not provide these as
the type and size depends on the surface luminaire is mounted to). Ensure the mounting brackets
are installed in line with each other to enable the product to be clipped in easily. Press the luminaire
into the brackets, use at least two brackets with luminaries one meter and under and three brackets
if the luminaire is over one meter.
