Vex Robotics PRO VersaPlanetary Dual Input Скачать руководство пользователя страница 3

Страница: 3 / 4

Page 3 of 4

VEXpro V

ersaPlanetary Dual Input

Step 4:

Slide the input coupler over the motor output shaft until gear cannot slide further. Take care to align the set screw

(highlighted green) with the clearance hole before tightening. Repeat for both motors.

Step 5:

Press the alignment pin into the Output Housing. Insert the 17mm unflanged bearing and (2X) 8-32 Nylock nuts as

shown.

Set Screw

Clearance Hole

Output Housing

17mm Unflanged

Bearing

8-32 Nylock

Nut (2x)

Alignment Pin

8-32 Nylock Nut (2x)

Alignment Pin

Содержание PRO VersaPlanetary Dual Input

Страница 1: ...ructions 0114 BAG Motor Input Housing Input Housing 17mm Unflanged Bearing RS 550 Motor Input Housing RS 775 Series Motor Input Housing Step 1 Select the appropriate input housing for your motors Then...

Страница 2: ...coupler as shown Take note of the orientation of the collar highlighted red The split in the collar should align with the notch in the input coupler as shown BAG Motor RS 775 Series or RS 550 2x Inpu...

Страница 3: ...ign the set screw highlighted green with the clearance hole before tightening Repeat for both motors Step 5 Press the alignment pin into the Output Housing Insert the 17mm unflanged bearing and 2X 8 3...

Страница 4: ...d VersaPlanetary not included Note The Dual Input replaces the input slice of the VersaPlanetary Use of Loctite is recommended with all screws Ensure your VersaPlanetary spins freely before installati...