er. An improperly sealed lid will result in air
sucked in by the sea water pump of the
engine which again will result in overheat-
ing of the engine.
To prevent damage of the water strainer,
during frost in the winter time, either the
water must be drained or the installation
must be filled with anti-freeze.
Remove the hoses to drain the strainer; the
housing is not equipped with a drain plug.
Take care that during filling with anti-freeze
no anti-freeze is spilled into the waterway.
Anti-freeze is poisonous.
3.0502
5
Cooling water strainer model 330
ENGLISH
Technical data
Material housing
: Polypropylene GF
Material strainer
element
: HD Polyethylene
Material lid
: Styrol/Acrylnitrile SAN
Weight
: 0.45 kg (1 lb)
Max. ambient temperature : 75 °C (167°F)
Max. water temperature
: 55 °C (131°F)
Max. pressure
: 0,5 bar
(50 kPa, 7 psi)
Model
Hose connection
Maximum capacity
Recommended capacity
in normal use
l/min
Imp.Gal/min US Gal/min
l/min
Imp.Gal/min US Gal/min
FTR330/13
13 mm
(1/2”)
50
11
13
23
5
6
FTR330/16
16 mm
(5/8”)
80
18
21
35
8
9
FTR330/19
19 mm
(3/4”)
120
26
32
51
11
13
FTR330/25
25 mm
(1”)
210
46
55
91
20
24
FTR330/32
32 mm (1 1/4”)
330
73
87
143
31
38
FTR33038
38 mm (1 1/2”)
470
103
124
200
44
53
FTR330/38
38 mm (1 1/2”)
460
101
122
195
43
51
