Vetter ManuTel G2 MTGZ16/10/16/A, Руководство по эксплуатации

Страница: 14 / 43

Fig. 4: Note: Locking pin
The “Locking pin” safety label is located on the front of the fork back.
2.7 Personnel requirements
2.7.1 Qualification
WARNING!
Risk of injury if personnel are not sufficiently qualified!
If unqualified personnel perform work on the Manu Tel
®
G2 or loiter in the
danger area of the Manu Tel
®
G2, dangers arise that could cause serious
injuries and significant property damage.
– Have all tasks carried out by personnel qualified to do so without
exception.
– Keep unqualified personnel away from the danger areas.
The following section of this manual stipulates qualifications for personnel in relation to
the various fields of activity:
Driver of industrial trucks
The driver of industrial trucks is capable of operating industrial trucks with a driver’s seat
or a driver’s platform thanks to their education, knowledge and experience. The driver of
industrial trucks is aware of the dangers involved with lifting and transportation tasks.
The driver of industrial trucks has proven their ability to drive industrial trucks with a driv-
er’s seat or a driver’s platform to the operator and has consequently been assigned con-
trol by the operator.
The driver of industrial trucks is familiar with the use of the Manu Tel ® G2 and the associ-
ated dangers.
Safety
Personnel requirements> Qualification
V1.09/2019 ManuTel ® telescopic fork arm Type G2 14