C-25 QUICK REFERENCE CHART
Switch from Bike 1 to Bike 2
Start/Stop Total Time Stopwatch
Enter Clock Programming Mode
Adjust Digits in any Programming Mode
Set Digits in any Programming Mode
Enter Wheel Size Programming Mode
Reset Stopwatches
A
C
B
C
B
B
C
Hold for 2 Seconds
Press
Hold for 2 Seconds in Clock Mode
Press, Hold for Fast Advance
Press
Hold for 2 Seconds in Trip Distance Mode ( )
Hold for 2 Seconds
FUNCTION
KEY
ACTION
Quick Programming Escape
A
Press at any Time when in Programming Sequence
Once you have finished with the installation procedure, you are ready to test the unit to make sure that it works.
STEP 1
Advance the computer to the speedometer mode.
STEP 2
Pick up the front of the bicycle and spin the front wheel. The computer should register speed within 1-2 seconds.
If you do not get a speed reading, check to be sure that the magnet and sensor alignment is correct and that
the space between the magnet and sensor is 1-2mm or less. If this does not solve the problem, call the Vetta
customer service hotline at 1.800.GO.VETTA.
TEST OF INSTALLATION