background image

ACTIVATE FREEZE FRAME MEMORY

In any mode, press the left computer key (B) for approximately 1 second.  The entire display will flash indicating 
that the feature is active.  You may now cycle through the functions by pressing the right hand key (A).

DEACTIVATE FREEZE FRAME MEMORY

Press the left computer key (B) to update the display and return to normal operation.

RESET CYCLING FUNCTIONS

In the           

/           

mode, press both keys for 2 seconds to clear the          ,          ,           and            displays.

WARNINGS AND CAUTIONS

!

!

!

  

CAUTION

    Vetta Sports encourages you to ride safely.  Wear a helmet every time you ride, use a front 

and rear light at night, and always keep your eyes on the road ahead of you.

  

CAUTION

    Vetta cycle computers are sophisticated electronic instruments.  Vetta recommends that this 

product be installed only by a qualified bicycle retailer.  Failure to read these instructions and improper 
installation of this device may void the warranty.  If you are in doubt about any aspect of the installation or 
operation of this product, consult your local bicycle retailer for clarification.

BATTERY INSTALLATION

186 1.5v Battery

The C-16 uses a common 

186 1.5v

 button cell battery.  Replacement batteries are 

available at most camera shops and from your Vetta retailer.  Under normal usage 
a battery should last approximately one year.  

NOTE:

 Most problems that occur 

with cycle computers are caused by dead or weak batteries.  If you are having 
problems with your computer's operation, check and replace the battery first.

STEP 1

Remove the battery cover from the bottom of the computer using a small flat 
blade screwdriver.

STEP 2

Install the battery into the battery compartment with the positive (+) side of the 
battery facing the compartment door.  Be careful when you are installing the 
battery not to bend any of the battery contacts.

STEP 3

Press the battery cap firmly into place making sure that the rubber o-ring seal does 
not get pinched or distorted as this will compromise the waterproofing of the unit.

AUTO CLEAR BUTTON

Press for total reset of unit.
All stored data will be erased.

!

  

CAUTION

  

Отзывы: