Vetronix mts 3100 mastertech, Руководство оператора

Страница: 3 / 60

FCC Compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Re-orient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Foreword
The Mastertech Multi-Function Tester and associated Program Card(s) are designed for use by trained
service personnel to diagnose and repair automotive electronic systems. Every attempt has been made to
provide complete and accurate technical information based on factory service information available at the
time of publication. However, the right is reserved to make changes at any time without notice.
To familiarize yourself with the Mastertech and Program Card capabilities and how to use them, please read
through the operator's manuals before putting the Mastertech and program card(s) to work. The tools are
designed to reduce time-consuming reference to manuals as much as possible. Once familiar with the tools
and their operation, you will be able to spend more time diagnosing and less time reading.
The Mastertech Multi-Function Tester and Program Card(s) provide the following capabilities:
• Data scan functions
• Bi-directional serial data commands
• Meter measurement functions
• Oscilloscope
• Operate as the center of an automotive diagnostic system
• Shop management functions
• Math functions and unit conversions
• Timer functions
• Future expandability