VETRON 5300, Инструкция, Страница: 44 / 83

1
2
4
3
42 43
07/2020
VETRON 5300 - POST BED MACHINE - INSTRUCTION BOOK
07/2020
VETRON 5300 - POST BED MACHINE - INSTRUCTION BOOK
05. PROGRAMMING
04. PROGRAM PARAMETER
-1-10
NR. PARAMETER DESCRIPTION
» STITCH LENGHT IN THE SEAM
010 Stitch length 1
Main stitch length in mm in the seam. The stitch length can also be entered in the
negative range. The seam will be done in reverse.
011 Stitch length 2
Second stitch length, which can be selected by pushing button
4
(parameter
018 ). The stitch length can also be entered in the negative range. The seam will
be done in reverse.
018
Button
4
Stitch length trigger function
Select function with button
4
.
OFF Without function
SWITCH Stitch length will change to 2
nd
stitch length as long as you hold it.
When button is released 1
st
stitch length is back.
TOGGLE Stitch length will change when button is pressed. When it is
pressed a second time, it will change back to 1
st
stitch length.
NR. PARAMETER DESCRIPTION
» FOOT STROKE
020 Foot stroke 1
Stroke in mm during normal sewing. The value must be set depending on
the thickness and texture of the material to achieve a correct material feed.
021 Foot stroke 2
2
nd
stroke in mm. Can be switched on when reaching thick joints in the seam.
Switching over can be done with key
3
or the electronic handwheel
1
.
It can also be done with a knee lever (optional) or with the automatic switch
parameter
027 .
ADVICE:
A seam program can be created with the following parameters. When a function is deactivated the according parameter
will not be displayed. To select a progam parameter you have to turn the JOG KEY and push it when the desired parameter
appears. It will now flash. Now you can select the desired parameter setting by turning the JOG KEY. The new setting will be
stored by pushing the JOG KEY again.