USER MANUAL
Box 79 Industrivägen 3
Tel. +46 (0)176-208920
Web
76040 Väddö, Sverige
Fax +46 (0)176-208929
2
SYMBOLS ON LCD:
ZERO Indication (
) :
cursor appears on the left edge of LCD Display (right of ZERO printed on the display-overlay), and indicates the scale is at zero-point.
NET Weight Indication (
) :
cursor appears on the left edge of LCD Display (right of NET printed on the display-overlay), This cursor indicates the tare weight has been deducted.
Indication of Weighing Range (
) :
cursor appears on the right edge of Total Price LCD (left of W1 or W2 printed on the display-overlay), and indicates the present weighing range to be Weighing Range 1
(W1) or Weighing Range 2 (W2).
!! Notice: The indication of weighing range is only available for the scale / indicator with multi-range (2 ranges) only.
Indication of kg
、
100g Weighing Unit (
) :
cursor will flash on the right edge of LCD Display (left of Kg, 100g printed on the display-overlay), This cursor indicates the present weighing unit.
OPERATION INSTRUCTIONS:
Status of the Battery :
When LCD indicates - LO - and the scale sounds beep beep beep every thirty-minute, it means the battery is running in low-voltage status. LCD will indicate - LO -
continuously for reminding the user to recharge the battery. If the battery is still running in low-voltage status without being recharged, LCD will indicate -OFF- and the scale
will sound beep repeatedly. Please power of the scale and recharge the battery (refer to page 10) immediately.
0 ~ 9 :
(1)
Pressing these keys to key in the unit price.
(2)
Press and hold [0] key till WEIGHT LCD display shows the voltage of battery. 6.1 ~ 6.5 means the battery is running in high-voltage status. Less than 5.5 means the
battery is running in low-voltage status. Please recharge the battery as soon as possible. Pressing [C] key could go back to normal operating-mode.
:
(1) Pressing this key to set the decimal point for the unit price.
(2) Press and hold [
] key till the scale sounds beep to enable or disable optional Backlight.
C:
Press this key to delete the setting of unit price. Users could key in the unit price directly without pressing [C] key while the last transaction had been finished for more than 5
seconds.