I. INTRODUCTION
Thank you for your purchase of Vetek high precision electronic weighing scale, which enables you to
measure both quantity and weight. The scale is easy to operate, precise, stable and with fast display
reaction. It is applicable in the electronic, hardware, plastic, medicine, textile and various other industries.
It is useful for packaging, inventory and various production and quality control cases. It will help you save
your time, labor, money, and reduce material waste, lower cost, improve your work efficiency, thus to
achieve maximum return on investment.
II. FEATURES
1.
The microprocessor in this scale features
(1)
Zero point tracking function.
(2)
Tare and pre-tare function.
2.
Easy operating and water-resistant membrane keypad.
3.
Easy to read LCD display.
4.
Counting function is applicable, with backlight function.
5.
Tare range is unlimited.
6.
The case shell is made of ABS shockproof plastics; stainless steel weighing pan is used for long-term
operation.
III. ASSEMBLY
A.
Models LPWN-1530 LPWN-7515 LPWN-1530K
1.
Remove the protection copper screw [2], and then screw out the protection copper screw [1];
2.
Align the three-hole aluminum column [6] and center of the three round holes on the scale support
[5] with the corresponding hole on the “-”shaped iron piece inside hole [7]. Then fix the three-hole
aluminum column [6] and scale support [5] on the “-”shaped iron piece of the scale by tightening
the M5 Allen screw [4] using an Allen wrench;
3.
Put the stainless steel weighing pan [3] on the scale support [5].
Instruktion-LPWN Rev 1.2005
Utskrift 2005-12-01
Användarmanual
Vetek AB
Box 79, Industriv. 3 760 40 Väddö
Tel 0176 208 920
Fax 0176 208 929
e-mail: [email protected]
www. vetek.se
Sida
3
