Vestil MSW Series Скачать руководство пользователя страница 5

Страница: 5 / 6

Rev. 4/28/2021

MSW, MANUAL

RECORD OF SATISFACTORY CONDITION (THE “RECORD”)

After the unit is assembled, make a detailed record of its condition. Include observations about

welds, frame elements, roll supports and roll support brackets, fasteners (bolts, nuts, washers, etc.) and

casters. Thoroughly photograph the unit from multiple angles so that all features are clearly imaged.

Photograph all labels applied to the product. Describe where each label is located. Collect the

photographs and writings in a single file. This file is a record of the product in satisfactory condition.

Compare the results of each inspection to this

RECORD

to determine whether the unit is in satisfactory

condition. Do not use the product unless it is in satisfactory condition.

INSPECTIONS AND MAINTENANCE (REFER TO EXPLODED VIEW, P. 3)

Compare inspection results to the

RECORD

. Do not continue to use the product unless every

component is in

SATISFACTORY CONDITION

. Cosmetic changes, like damaged paint/powder coat

do not constitute changes from satisfactory condition. However, touchup paint should be applied to all

affected areas as soon as damage occurs. Contact

TECHNICAL SERVICE

to order replacement

parts. Contact information is provided on the cover page of this manual.

Inspect the following at least once per month:

1. Surfaces –Clean dirt and debris from the surfaces of the stand.

2. Fasteners – Examine all fasteners (bolts, nuts, lock nuts, washers, etc.). Replace damaged/worn

hardware. Tighten bolts and nuts. If a lock nut has loosened or has been removed, it

3. Frame/assembly – Examine the frame for wear, breaks, corrosion/rust, metal fatigue, and other

forms of damage (e.g. impact damage). . If rusting is purely superficial, remove the rust/corrosion.

Clean the affected area and apply touchup paint. If rusting, rot, or thinning has weakened the

material, contact

TECHNICAL SERVICE

for assistance.

4. Casters – Casters must be tightly fastened to the frame. Tighten the hex nuts, if necessary.

Examine the caster forks, wheels, and wheel hubs for cracks, bends, and other damage. Check the

axle bolt and nut of each caster. Push the cart a short distance. The cart should not wobble/shake

while rolling.

5. Labels – Replace all labels that are damaged, missing, or not easily readable.

LABELING DIAGRAM

Label content and location are subject to change so your product might not be labeled exactly as

shown. Compare this diagram to the

RECORD

If differences exist between the diagram and the

RECORD

contact

TECHNICAL SERVICE

Replace all labels that are damaged, missing, or not easily

readable (e.g. faded). To order replacement labels, contact the technical service and parts department

online at

http://www.vestilmfg.com/parts_info.htm

. Alternatively, you may request replacement parts

and/or service by calling (260) 665-7586 and asking the operator to connect you to the

TECHNICAL

SERVICE AND PARTS DEPARTMENT

LABEL 1153

LABEL 658

LABEL 212

Содержание MSW Series







Результаты поиска

Содержание MSW Series

Отзывы:

Бренды по названию

Популярные бренды

Vestil MSW Series, Руководство пользователя

Результаты поиска

Содержание MSW Series

Отзывы:

Бренды по названию

Популярные бренды